Forums Knowledge Base Knowledge Base Articles 276 – THESKY AUTOMATICALLY DISCONNECTS TELESCOPE

Viewing 1 post (of 1 total)
  • Author
  • #88202

    admin
    Participant

      Software Bisque Knowledge Base Article – 276

      THESKY AUTOMATICALLY DISCONNECTS TELESCOPE

      ISSUE

      Upon poor communications TheSky automatically disconnects the telescope

      RESOLUTION

      This behavior is by design.

      To make TheSky not automatically disconnect the telescope upon poor communications do the following:

      1. Go to Start, Run and type “Regedit” and press OK.
      2. Navigate to the HKEY_CURRENT_USER/Software/SoftwareBisque/TheSky/TELESCOPE.
      3. Select, Edit, New, DWORD value, for the Name type “AutoTerminateErrCnt” and for the value put in something larger than 3 which is the default.

      APPLIES TO

      General

      KEYWORDS

      SBKB

      This article was formerly published under the identifier Q539KB in Software Bisque’s prior knowledge base.

      Last Reviewed: 11/24/2004

    Viewing 1 post (of 1 total)
    • The forum ‘Knowledge Base Articles’ is closed to new topics and replies.